In Section 8.3.3 in the Companion Specification, there are a series of rules for generating BrowseNames for Nodes representing MTConnect Data Items. Rule #3 has a series of lower level rules for generating the BrowseName. Most of these lower level rules are mutually exclusive and the sequence at which you apply these rules does not impact the generation of the BrowseName. However, there is at least on case where the sequence of applying the rules is important to the generation of the BrowseName. The documentation does not clearly define that the rules MUST be applied in sequence.

Here is the example encountered:

  Found a case where I can’t find a clear answer on how to construct a Browse Name for the following case:

   Have two PART_COUNT type data entities associated with a controller.   Both are Discrete.   
    One with name SHT1 and the other with name SHT2

   Which is the correct format?     PartCountDiscrete[SHT1]  or PartCount[SHT1]Discrete?

Recommend updating the documentation to clarify the use of these rules.